Stump Grinding Questions
Common questions about grinding depth, wood chips, gate access, wells and irrigation, timing, and cost.
How far below grade do you grind?
Six to twelve inches. That's deep enough to backfill with soil and grow grass over the spot, or to plant nearby without hitting solid wood. It isn't a full root excavation. The wider root system stays in the ground and breaks down over the following years.
What happens to the wood chips?
That's your choice. We can leave them in the hole, rake them into a pile where you want it, or haul them off if the volume is manageable. A large oak produces a large volume of chips, so if you want them gone entirely, tell us when you call rather than when we arrive.
Will the stump grow back?
Not the stump itself. Some species, live oak in particular, can push suckers up from roots left in the ground for a season or two. Mowing them off handles it in most yards. Grinding removes the stump, not every root in the soil.
Can I plant a new tree in the same spot?
Not directly in the hole, and not right away. Ground-up wood ties up nitrogen while it breaks down, and there's still root material below. If planting is the goal, tell us and we'll pile the chips off to the side so you can backfill with clean soil. Plan on planting a few feet off center from the old trunk.
Will you fit through my gate?
A 36-inch gate is usually a yes. Measure the narrowest point of the opening, then check what's behind it. A step down, a tight turn, or an AC pad in the way matters as much as the gate width. A photo answers this in about ten seconds.
What about wells, septic, irrigation, and buried wire?
Tell us before anything starts. We work next to well lids and irrigation boxes constantly and it's routine when we know where they are. What we won't do is guess where an unmarked line runs. Flags, spray paint, or a walk around the yard together all work.
How long does a stump take?
Most single residential stumps take part of a day rather than a whole one. A pine stump can be quick. A wide valley oak, or a cluster of old orchard stems, takes considerably longer. Access is often the bigger variable. A stump twenty feet from the driveway and a stump at the bottom of a stepped backyard are very different jobs at the same diameter.
What does stump grinding cost?
It depends on diameter, species, how many stumps you have, and how hard the stump is to reach. That's why we ask for a photo instead of quoting a number off a webpage. Call with the details and you'll get a straight answer.
Do I need to be home?
Not necessarily, as long as we can get in and you've marked anything we need to avoid. Plenty of customers leave the gate unlatched and come home to a filled-in hole. If there's a gate code or a dog, mention it when you book.
Do you take out the whole tree or just the stump?
Both, in the small and medium range. A dead pine along a fence line is squarely our work. A tall tree leaning over a roof needs a company with a crane.
Do you work in the rain or through winter?
Yes, within reason. Winter is often a good time to grind, because the yard is dormant and you aren't working around a growing season. Saturated ground on a slope is the limit, since the machine has to sit on something that will hold it.
When are you available?
Monday through Friday, 7:00 AM to 7:00 PM. Saturday and Sunday, 8:00 AM to 5:00 PM.